-
Part Number: RDP-SEAL-KIT
Brand: Air System Products
RDP-SEAL-KIT Cylinder O-rings, Trigger Block O-rings
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$57.00 -
Part Number: RDP-RETROKIT
Brand: Air System Products
RDP-RETROKIT Upgrade kit for units built prior to June 2003
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$295.00 -
Part Number: RDP-H1-KIT
Brand: Air System Products
RDP-H1-KIT Inlet Head Assembly
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$154.00 -
Part Number: RDP-FIT13
Designed For Use With: Air System Products
RDP-FIT13 1/8" x 1/4" Tube Connector
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$13.00 -
Part Number: RDP-FILTER
Designed For Use With: Air System Products
RDP-FILTER Air Filter
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$29.00 -
Part Number: RDP-CYL-9.5
Brand: Air System Products
RDP-CYL-9.5 Translucent Vessel
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$87.00 -
Part Number: RDP-BOLT-KIT
Brand: Air System Products
RDP-BOLT-KIT Tie Rods and Nuts
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$57.00 -
Part Number: RD-H
Brand: Air System Products
RD-H Heater 100 Watt (250 PSI Max.)
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$437.00 -
Part Number: RD-C
Brand: Air System Products
RD-C Robo-Drain Cycle Counter
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$387.00 -
Part Number: RD-A
Brand: Air System Products
RD-A High Level Alarm Kit (150 PSI Max.)
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$123.00 -
Part Number: PZP-PUMP
Brand: Air System Products
PZP-PUMP Pneumatic replacement pump.
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$441.00 -
Part Number: PZM-55
Brand: Air System Products
PZM-55 Posi-Zorb 55 Gallon Filter Module
Estimated Lead Time:
3-5 Days
Estimated Lead Time
3-5 Days
$2,337.00
Air System Products
Accu-Zorb Oil/Water Separators by Air System Products
Air System Products, Inc. is a leading U.S. manufacturer of condensate drains and oil/water separators for the air and gas compressor market. Their advanced line includes the industry-proven Zero Air Loss drains and Accu-Zorb Oil/Water Separator Systems designed to reduce waste, protect equipment, and lower environmental impact.
Zero Air Loss drains discharge only when condensate reaches a preset level, using a smart sensor to eliminate unnecessary air loss. This technology reduces energy consumption, eliminates the noise and inefficiency of traditional timer drains, and prevents system pressure fluctuations—helping facilities save on compressor operating costs.
The Accu-Zorb Series extends this same commitment to efficiency with a multi-stage condensate treatment process that safely removes emulsified oils from compressed air condensate. Each unit combines a pre-absorption chamber with zeolite filter media to separate oil and water—ideal for systems using soluble or detergent-based lubricants such as ATF, polyglycol, and motor oils.
Every Accu-Zorb separator features replaceable media bags, a translucent oil collection container for visual monitoring, and optional upgrades like remote flow indicators, equalizer manifolds, and low-temperature heaters for cold environments. Together, these options deliver dependable condensate management that meets environmental regulations.
Install the Accu-Zorb Oil/Water Separator to reduce waste hauling costs by up to 98%, comply with sanitary sewer discharge limits, and maintain peak performance of your compressed air system.